Some of the unique features of my patents and designs include:

  • Allows the operator to connect to the auger bits without the need for assistance or the use of his or her back!
  • Designed so that it can be moved with a forklift while loaded!
  • Designed to be used with a variety of augers by adjusting for both height and diameter.
  • Comes with pins to lock every bit into place if the desire for shipping it while loaded ever arises!
  • Allows the operator to precisely align the holes of the drive motor with the auger bits from the cab!
  • Allows the operator to safely exit the cab when the boom is braced through the drive motor, which is coupled to the desired auger bit held vertically in the rack!
  • Holds the augers vertical in a ready to use position!
  • Multiple racks can be stacked for shipping reducing your shipping costs!
  • American Made Steel!
  • Sand blasted, zinc primed and powder coated red for a long lasting finish! 


      Specs are as follows

  • Width 96”
  • Depth 30" to 36” Depending on the model
  • Height 40”
  • Weight 300-450 pounds
  • Holds auger bits up to 24" or 36" diameter depending on the model
  • Quantity of bits per rack depends on the diameter of the augers 3-8 bits total
  • Smallest gap between bits 2”
  • I'm sure You'll find an Increase in Safety and Function with my Auger Rack products.


Details

  • Fully welded and completely assembled.
  • Load using a skid steer or a forklift.
  • Rack is designed to free stand and resist normal lateral forces imposed by the equipment while fully loaded.
  • Every shelf is sloped to the back to allow buckets to drain rain water.
  • Side slope protection bar prevents buckets from sliding sideways and falling off the rack when placed on a cross slope.
  • Upper 3 shelves come with load stops located at the front end of each arm.


Specs are as follows:

  • Width 48”
  • Depth 72”
  • Frame Height 99”
  • Overall Height 116"
  • Weight 597 pounds
  • Weight with stabilizer 680 pounds
  • Top shelf height 99”
  • Height distance between shelf’s 27”
  • 1st and 4th Shelf Depth 45"
  • 2nd and 3rd Shelf Depth 40”
  • Maximum Bucket Width 84" 
  • Minimum Bucket Width 66"
  • Average 84" Heavy Construction Bucket Weight 650 pounds
  • 2nd 3rd and 4th Shelf Capacity 1000 pounds per shelf
  • 1st Shelf Capacity 1500 pounds

​Specs are as follows:

  • Width 96”
  • Depth 48”
  • Height 70”
  • Weight 795 pounds
  • Each shelf capacity 3,500 pounds
  • Total capacity 10,500 Pounds
  • Top shelf height 63”
  • Height distance between shelf’s 28”
  • Shortest fork length 36”
  • The bottom 2 levels can hold forks up to 96" long 
  • The top level can hold forks up to 72" long
  • Fork thickness can be up to 3" thick
  • Works well with class 2 and class 3 rail and bar forks

You’ll find in all my products, high quality fully welded American Made Steel, with a quality Powder Coat correctly prepped for the outdoors by sand blasting and then zinc primed.

Yard Racks


Details

  • Fully welded and completely assembled.
  • Load using a skid steer or a forklift.
  • Rack is designed to free stand and resist normal lateral forces imposed by the equipment while fully loaded.
  • Every shelf is sloped to the back to allow buckets to drain rain water.
  • Side slope protection bar prevents buckets from sliding sideways and falling off the rack when placed on a cross slope.
  • Upper 3 shelves come with load stops located at the front end of each arm.


Specs are as follows:

  • Width 48”
  • Depth 96”
  • Frame Height 99”
  • Overall Height 103"
  • Weight 815  pounds
  • Top shelf height 99”
  • Height distance between shelf’s 27”
  • 1st Shelf Depth 42"
  • 2nd and 3rd Shelf Depth 40”
  • 4th Shelf Depth 42"
  • Shelf’s slope toward post 4deg
  • Holds a Quantity of 8 Buckets
  • Maximum Bucket Width 84" with side protection
  • Minimum Bucket Width 66" with side protection
  • Average 84" Heavy Construction Bucket Weight is 650 pounds
  • 2nd 3rd and 4th Shelf Capacity 1000 pounds each
  • 1st Shelf Capacity 1500  pounds

Please call us if you have any questions!

Some of the unique features of my patents and designs include:

  • Allows the operator to connect to the auger bits without the need for assistance or the use of his or her back!
  • Designed so that it can be moved with a forklift while loaded!
  • Designed to be used with a variety of augers by adjusting for both height and diameter.
  • Comes with pins to lock every bit into place if the desire for shipping it while loaded ever arises!
  • Allows the operator to precisely align the holes of the drive motor with the auger bits from the cab!
  • Allows the operator to safely exit the cab when the boom is braced through the drive motor, which is coupled to the desired auger bit held vertically in the rack!
  • Holds the augers vertical in a ready to use position!
  • Multiple racks can be stacked for shipping reducing your shipping costs!
  • American Made Steel!
  • Sand blasted, zinc primed and powder coated red for a long lasting finish! 


Specs are as follows

  • Width 96”
  • Depth 30" to 36” Depending on the model
  • Height 40”
  • Weight 300-450 pounds
  • Holds auger bits up to 24" or 36" diameter depending on the model
  • Quantity of bits per rack depends on the diameter of the augers 3-8 bits total
  • Smallest gap between bits 2”
  • I'm sure You'll find an Increase in Safety and Function with my Auger Rack products.

Some of the unique features of my patent and design are:

  • Allows the buckets to drain water by positioning them at an angle.
  • Increases the operators view of the coupling portion on the back of the bucket.
  • Gives the operators something to pull the bucket against while coupling the bucket to the machine.
  • Allows the desired bucket to twist slightly into alignment with the machine when they're out of square, by allowing the other buckets to also twist left or right.
  • Smaller buckets can be placed 2 deep without hindering access to the front bucket.
  • The loaded bucket rack can easily be moved with 60" forks, for organizational and cleaning purposes.
  • Eliminates the buckets from freezing to the ground and reduces rust.
  • Designed as a single level rack for the purpose of eliminating bucket cylinder damage often caused by contacting upper levels on multi-level racks.
  • The Bucket Racks can be stacked up to 6 high, reducing the overall shipping cost per rack.


Specs are as follows:


  • Width 96”
  • Depth 48”
  • Height 14”
  • Weight 429 pounds
  • Steel wall thickness 3/16"
  • Bucket widths 6"- 84"
  • Storage Deck Width 92"


Excavator size based on metric tons 1 - 20 MT
You’ll find in all my products; high quality fully welded American Made Steel, and a high quality Powder Coat finish.


Model AR-24YA- (4-8) # of Bit Holders
Adjustable Auger Rack Storage and Handling System, which holds up to 24" in diameter augers.  By using our Sliding Bit Holder Assemblies it can be reconfigured to your changing auger inventories.  (Red Numbers represent the quantity of Sliding Bit Holder Assemblies that come with each rack)
Model AR-36YA-
(3-6) # of  Bit Holders
Adjustable Auger Rack Storage and Handling System, which holds up to 36" in diameter augers.  By using our Sliding Bit Holder Assemblies it can be reconfigured to your changing auger inventories.  (Red Numbers represent the quantity of Sliding Bit Holder Assemblies that come with each rack)
Additional Holders AR-24YA-SBHA or AR-36YA-SBHA (Patent Pending) is the Sliding Bit Holder Assemblies that come with our Auger Racks.  If the future need should arise to add another holder to your rack, additional assemblies are available to purchase separately.  
New AR-YA-EH is an optional holder that holds 1 Extension or Adapter.  It quickly attaches near the back of the rack between the augers.


Copyright © Auger Rack


I’ve focused on Safety and Function with my new Fork Rack design.  
Some of the unique features of my patented design are:

  • Works with both Rail and Pin on forks of many different lengths widths and thicknesses. 
  • Includes a Pull Out Tool, that assists with sliding out the desired set of forks a few inches for retrieval with the forklift. 
  • Includes a Removal Assist Tool for assisting in unhooking the Rail Forks from the forklift without using your back.  This is a huge safety concern in the industry.  This tool makes this a complete system for adding and removing forks from the machine safely.  (Sorry I don’t have a picture of this yet but I will have a Video coming soon.)
  • Allows the forks to be inserted parallel to the ground, then as the forks are lowered it positions them in a tilted back position.  This is the ideal position for retrieval by the forklift.
  • Has integrated front tie off points for securing the forks in the rack against lateral movement during seismic events or accidental impacts from other equipment.  
  • The back side has tie off points for connecting the included chain to flag off the area between the back of the rack and a fence or other structure.  This area is where the fork tips will be hanging out.  
  • It's designed to free stand on hard surfaces including compacted road base, without any need to fasten it down. 
  • It's engineered to handle pushing forces by the forklift while fully loaded.  


Some of the unique features of my patent and design are:


  • Allows the buckets to drain water by positioning them at an angle.
  • Increases the access to buckets by allowing each to be retrieved quickly by forklift. 
  • Gives the operators something to rest the bucket against while placing the buckets on the rack.
  • Allows the desired bucket to twist slightly into alignment with the machine when they're out of square, by allowing the other buckets to also twist left or right.
  • Smaller buckets can be placed 2 deep without hindering access to the front bucket.
  • The loaded bucket rack can easily be moved within a yard setting safely with 60" forks and a large capacity machine, for organizational and cleaning purposes.
  • Eliminates the buckets from freezing to the ground and reduces rust from water retention.
  • Designed as a multi-level rack for the purpose of reducing ground space.
  • The Excavator Bucket Rack comes with a handling tool which is used in place of your ball mount on your existing forklift attachment normally used for moving trailers.


Specs are as follows:

  • Width 96”
  • Depth 48”
  • Height 100”
  • Weight 1550 pounds
  • Steel wall thickness 3/16"
  • Bucket widths 6"- 84" 


Excavator bucket sizes based on Machine All Mini Excavators and Backhoe buckets
You’ll find in all my products; high quality fully welded American Made Steel, and a high quality Powder Coat finish.

I’ve focused on Safety and Function with my new Skid Steer Pallet Fork Rack design.  
Some of the unique features of my patented design are
:

  • Works with all Skid Steer Pallet Forks including different fork lengths and thicknesses. 
  • Stores 8 attachments in less space than 2 placed on the ground. 
  • Designed with an open back that can be placed around light poles.
  • Designed to free stand on hard surfaces including compacted road base, without any need to fasten it down. 
  • Engineered to handle pushing forces from the while fully loaded. 


Specs are as follows:

  • Width 48”
  • Depth 82"
  • Height 69”
  • Weight 910 pounds
  • Shipping NMFC# 164340
  • Shipping Class 150
  • Each shelf capacity 500 pounds
  • Total capacity 6,000 Pounds
  • Height distance between top and bottom Tiers 45”
  • Shortest fork length 30”
  • Can hold forks up to 72" long
  • Fork thickness can be up to 2.25" thick

You’ll find in all my products, high quality fully welded American Made Steel, with a quality Powder Coat correctly prepped for the outdoors by sand blasting and then zinc primed.